Our Slotted Block Tie (Type II) affixes masonry veneer walls to a structural backing like concrete block masonry.


  • In addition to the benefits listed under Type I,
  • Maximizes connectors strength and masons productivity
  • Permits up to 60 mm in-situ vertical adjustment
  • Eliminates the need for Tie Fasteners
  • Eases the inspection of spacing and tie placement
  • Complete wall system be installed by one trade
  • Accommodates any wall, cavity or insulation widths
Designed to Transfer Lateral Loads While Accommodating Construction Tolerances.

The Slotted Block Tie (Type II) system consists of a double-Slotted Block Plate, when compared to the Slotted Block Tie (Type I), which uses a single slot rather than two shorter slots, the Slotted Block Tie (Type II) offers greater vertical adjustability, reduced displacement, and higher strength.

It must be noted that our Slotted Block Ties transfer lateral load, but they are not designed to resist movement vertically, and this can reduce the effectiveness of the entire wall assembly to function in a combined manner. For products that better resist movement, shear and load in cavity walls, view our_Shear_ Connector suite of products.

The double-slotted plate is mortared directly into a head joint in the structural backing. This creates a stable integration and it reduces any play, deflection or connector deterioration.

The two slots in the tie each allows up to 1 inch of vertical play, and this ensures vertical flexibility regardless of where the Plate was fastened to the masonry backing.

Clear selection
SKU: N/A Category: Tag: