HA L Anchors – Overview

View HA L Medium Load Anchor Products

HA L Anchor Fixing Systems - Introduction

  • Direct fixing onto wood studs, steel studs, block and concrete walls with expansion bolts. Indirect fixing onto sub
  • channel system with hex bolts.
  • Fixing into wood framing with lag screws, and steel studs with self-tapping screws.
  • Economical & easy fixing.
  • Installation at horizontal or vertical joints

Adjustability

Red Leaf Stone Anchors - HA L Anchor Fixing Systems - Adjustability 11. Vertical adjustment is made through the slot hole. The anchor is fixed onto the bolt with the serrated washer and nut.
2. A slot pin hole can be provided to enable lateral adjustment of the pin.
Red Leaf Stone Anchors - HA L Anchor Fixing Systems - Adjustability 23. Greater projection sizes can be achieved by using shims. Shims are placed at the back of the anchor.
4. An adjustment plate is available in HA04 & HA05 type L anchors where adjustment of the projection size can be made.

Installation at horizontal joints

Red Leaf Stone Anchors - HA L Anchor Fixing Systems - Installation at horizontal joints 3
Red Leaf Stone Anchors - HA L Anchor Fixing Systems - Installation at horizontal joints 1
Red Leaf Stone Anchors - HA L Anchor Fixing Systems - Installation at horizontal joints 2
HA01 L Anchors

  • Recommended projection sizes up to 2-1/8″ (50 mm.)
  • Slabs are pinned at the bottom and upper sides.
  • Adjustability for projection size can be done by inserting shims* between the anchor and the wall. (*Section 8- Accessories)
  • Anchors act as load bearing and restraint, carrying the stone slabs above and restraining them below.
HA03 L Anchors

  • Recommended projection sizes up to 2-1/8″ (50 mm.)
  • Slabs have slits and the kerf parts of the anchors are inserted into the slit edges of the stone slabs.
  • Adjustability for projection size can be done by inserting shims between the anchor and the wall.
  • Anchors act as load bearing and restraint, carrying the slabs above and restraining the slabs below.
HA04 L Anchors

  • Recommended projection sizes up to 7-1/16″ (180 mm) & where substrates have large tollerances.
  • Slabs are pinned from the bottom and upper sides.
  • Adjustability of the projection size is enabled with the adjustable plate, which is fixed to the body with hex bolts.
  • Anchors act as load bearing and restraint, carrying the slabs above and restraining the slabs below.

HA L Anchor Fixing Systems – Installation

HA L Anchor Fixing Systems - Installation at Horizontal Joints - 6

Installation at horizontal joints

Red Leaf Stone Anchors - HA L Anchor Fixing Systems - Installation at horizontal joints 3

1- Through bolt
2- Anchor body
3- Serrated washer
4- Round washer for through bolt
5- Hex nut for through bolt
6- Plastic tube
7- Flanged pin
In this instance the dead load of the slab is divided by two, as half the weight of the slab is transferred to the load bearing anchors.
HA L Anchor Fixing Systems - HA01 L Anchor HA01 L Anchor
HA L Anchor Fixing Systems - Installation at Horizontal Joints - 2
HA L Anchor Fixing Systems - Installation at Horizontal Joints - 3
HA L Anchor Fixing Systems - HA04 L AnchorHA04 L Anchor
HA L Anchor Fixing Systems - Installation at Horizontal Joints - 5
HA L Anchor Fixing Systems - Installation at Horizontal Joints - 4

HA Anchors – Special Application

Red Leaf Stone Anchors - HA Anchors - Special Application 1
Red Leaf Stone Anchors - HA Anchors - Special Application 2
L anchor with adjustable plate combine with a wedge washer instead of serrated washer. This is chosen in cases where vertical loads are too high for the serrated washer to sustain the no slip feature.
HA 21 restraint anchor, designed for the purpose of installing into insulated walls more quickly. Insulation is drilled instead of cut. HA 21 anchors are generally used as restraints and are used for corbel facade installations.
Red Leaf Stone Anchors - HA Anchors - Special Application 3
Red Leaf Stone Anchors - HA Anchors - Special Application 4

L anchors are used to install thick stone slabs around corners.
L anchors are used to support large semi circular stones to form a massive column block.
L anchors used for stone installation around column with variations in stone and projection.